saintly@saintlylighting.com

English

Five rules for hotel custom lighting maintenance

by:Saintly     2021-05-28
Five rules for hotel custom Saintly Lightingmaintenance

If you compare an unfurnished hotel to a canvas, the decoration is like a painting process, and the lighting is the finishing touch on this picture.



   However, if you don't get the proper cleaning and maintenance, no matter how high-end lighting is, it will soon fade. Regular cleaning and maintenance of lamps can maintain the brightness of the lighting and extend the life of the lighting. The lampshade is getting dim due to dust. If it is not treated in time, the brightness will be reduced by about 30% a year on average. Therefore, it is particularly important to clean the lampshade and lamp tube or bulb regularly.



   In the maintenance need to pay attention to the following five rules



   First, you should carefully read the markings of the lamps and read the installation and operation instructions, and then install and use the lamps according to the instructions, otherwise there may be danger;



   Second, replace the aging lamp tube in time according to the light source parameters provided by the sign. If the two ends of the lamp tube are red, the lamp tube is black or dark, and the lamp does not light up, the lamp should be replaced in time to prevent Unsafe phenomena such as ballast burnout occur;



   Third, be careful not to change the structure of the lamp during cleaning and maintenance, and do not change the parts of the lamp casually. After the cleaning and maintenance, the lamp should be installed as it is, and do not miss or wrongly install the lamp parts;



   Fourth, the lamp must be maintained during use to extend its service life. The lamp tubes in the room should be wiped with a dry cloth frequently, and attention should be paid to prevent moisture intrusion, so as to avoid rust damage or leakage short circuit after a long time; if the lamps are non-metallic, they can be wiped with a damp cloth to avoid dust accumulation and hinder the lighting effect;



   Fifth, try not to switch frequently when using the lamp, because when the lamp is frequently started, the current through the filament is greater than the current during normal operation, which makes the temperature of the filament rise sharply and accelerate sublimation, which will greatly reduce its Service life, so it is necessary to minimize the switch of the lamp.



   Special reminder



   Humidity can easily cause the lamps to rust, peel off the paint, and shorten the service life of the lamps. Therefore, moisture prevention is the key to lighting maintenance to prevent moisture intrusion, corrosion damage or leakage short circuit.



   It is best not to clean the lamp with water, just wipe it with a dry cloth dampened with water. If you accidentally touch the water, try to wipe it dry as much as possible. Do not wipe it with a wet cloth immediately after turning on the light.



   Zhongshan Huaguang Technology Co., Ltd., the world's top hotel engineering Saintly Lightingmanufacturer, specializing in the design and production of hotels, KTV clubs, villas and other non-standard lighting, lamp customization industry leaders. National unified service hotline: 0760-22760338
Maintaining modern led lighting is not as easy as it may seem. You have to do plenty of important tasks. So cruel is the truth unless you've got a to help you.
If you are ready to stop the problem of modern led lighting and go back to normal, contact us at Saintly Home Decor Lamps. Zhong Shan Saintly Lighting Co. Ltd is ready to help you out.
Being focused on the goals of modern light fixtures, our team, and most importantly, ourselves is critical to long-term success.
Unlike the modern led lighting, the is more flexibly used in accasions where modern led lighting .
The stability of the system, controllability of the modern led lighting process, and mobility of the machines provide with a flexible and reliable modern light fixtures system.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...