Points for purchasing floor lamps, pay attention to the height of the top-illuminated floor lamp; when purchasing the top-illuminated floor lamp, consider the height of the ceiling and other factors. Take the 1.70 m-1.80 m high floor lamp as an example, the ceiling height is above 2.40 m. The best effect If the ceiling is too low, the light can only be concentrated in a local area, making people feel that the light is too bright and not soft enough. At the same time, when using the top-illuminated floor lamp, the ceiling in the home should be white or light-colored, and the ceiling material should have a certain reflective effect. Pay attention to the luminosity of direct-illuminated floor lamps; pay attention when purchasing direct-illuminated floor lamps. The lower edge of the lampshade is lower than the eyes, so that the eyes will not feel discomfort due to the light of the bulb. In addition, too much indoor light contrast will increase eye load, try to choose a floor lamp that can be dimmed. When in use, because the direct-illuminated light is concentrated, it is best to avoid mirrors and glass products near the reading position to avoid discomfort caused by reflections. Modeling floor lamps should pay attention to style; if you buy a 'modeling floor lampOf course, when purchasing this type of floor lamp, you must consider its consistency with the overall style of your home. For example, a noble classic standing lamp made of heavy blood-flower stone is totally different from modern furniture with yuppie style and streamlined style. Floor lamp installation method 1. Preparation before installation Before installation, carefully read the installation drawings and the product manual of the floor lamp, and prepare the common tools for lamp installation, such as flat-headed Phillips screwdriver, hammer, etc. After unpacking the parts, please don't confuse them. If there are many similar parts, the installation drawings will generally draw a comparison chart of actual size. Crossing the unused parts makes it very easy to distinguish the various parts. 2. Check before installation. Before installation, check the accessories of the floor lamp and other conditions. If you find that the floor lamp board is damaged, you can contact the merchant for replacement. Where the screws, eccentric parts, and wooden shafts are to be installed, the guide holes will be opened, so there is no need to worry about the positioning of the parts. It should be noted that the wrong parts should not be installed and then repeatedly screwed together, otherwise the plate will be easily damaged, and the installation will often cause instability and tilt. 3. Installing the floor lamp. Generally, the floor lamp should have a cast iron chassis, which is slightly smaller than the surface base. The black plastic cap should be the fastener used to fix the lampshade. The order of parts from bottom to top should be: chassis fastening nut, Cast iron chassis, base, lamp pole, lamp holder, lampshade, plastic fasteners, bulbs. The power cord coming out of the floor lamp pole passes through the chassis fastening nut, cast iron chassis, and base, and then connects to the power cord and wraps it with electrical tape. The chassis should have a recess to extend the power cord. The floor lamp here reminds everyone that the power cord of the floor lamp must be handled properly. One is the safety of electricity use, and the other is that it is not easy to trip people when walking around in the home. Floor lamp maintenance tips: 1. Moisture-proof electrical appliances are most worried about moisture, which will reduce the service life and also be dangerous to electricity. Therefore, the key step in floor lamp maintenance is moisture-proof, whether it is placed in the living room, or in the bathroom or bathroom. For lighting and kitchen stove headlights, moisture-proof lampshades must be installed to prevent moisture intrusion and promote rust damage or leakage short circuits on the lamps and lanterns. 2. Dust removal floor lamp maintenance often requires dust treatment, especially the lampshade of the floor lamp. The lampshade is easy to accumulate ash layer and cause darkening, which affects the lighting effect, so it should be cleaned frequently. When cleaning the lampshade of the floor lamp, use a clean feather duster to gently sweep away the dust, so as not to deform the lampshade. There are several situations for floor lamp dust removal and wiping: (1) For normal cleaning, use a clean feather duster to gently dust off. Be very careful. (2) If it is a non-metal floor lamp, it can be wiped clean with a damp cloth. Be careful not to wipe the power cord. (3) If it is a metal lamp, wipe it with a dry cloth, don't touch it with water. Note: When cleaning and maintenance, you must disconnect the power supply first, and at the same time, be careful not to change the structure of the lighting, and do not randomly replace the parts of the lighting. After the cleaning and maintenance, you should install the lighting as it is, and do not miss or install it incorrectly. parts, so as not to cause danger. At the same time, do not clean the lamp with water as much as possible, just wipe it with a dry cloth dampened with water. If you accidentally touch the water, try to wipe it dry as much as possible. Do not wipe it with a wet cloth immediately after turning on the light. 3. Don't switch frequently. Try not to switch frequently when using the lighting, because when the lighting is frequently started, the current through the filament is greater than the current during normal operation, which makes the temperature of the filament rise sharply and accelerate sublimation, which will greatly reduce its use. Life, this is also a point that should be paid attention to in all lighting maintenance. modern light fixtures is an inevitable and critical part of being a manufacturer, and it's more complicated than just manufacturing products and serving customers. Saintly Home Decor Lamps has a whole range of different items to help you make an informed choice every time you make a purchase. Check it! modern light fixtures has obtained many affirmation in the market. Undoubtedlly, our customers are totally satisfied with our products.