saintly@saintlylighting.com

English

These issues should be paid attention to when installing Nordic minimalist lighting

by:Saintly     2021-06-09
As the home decoration heat continues to heat up, the Nordic minimalist lighting changes are also changing with each passing day. It is no longer limited to the previous single lamp, but has developed to diversification. It not only absorbs the luxury and style of chandelier, but also adopts ceiling installation. In this way, it avoids the shortcomings that a short room cannot be equipped with large luxury lighting. The lamp body of led Nordic minimalist lighting is directly installed on the roof, suitable for overall lighting, usually used in living rooms and bedrooms. The Nordic minimalist lighting should pay attention to the following points in the installation and use: 1. When installing the Nordic minimalist Saintly Lightingin the masonry structure, the embedded bolts should be used, or the expansion bolts, nylon plugs or plastic plugs should be used for fixing. wedge. And the carrying capacity of the above-mentioned fixing parts should match the weight of the Nordic minimalist lighting, so as to ensure that the Nordic minimalist Saintly Lightingis fixed firmly and reliably, and can extend its service life. 2. When using expansion bolts to fix, the bolt specifications should be selected according to the technical requirements of the product, and the drilling diameter and embedment depth must be consistent with the bolt specifications. 3. The number of bolts for fixing the lamp holder should not be less than the number of fixing holes on the base of the lamp, and the diameter of the bolts should match the hole diameter; lamps without fixed mounting holes on the base (punch holes during installation), each lamp is used for fixing The number of bolts or screws should not be less than two, and the center of gravity of the lamp must be consistent with the center of gravity of the bolts or screws; only when the diameter of the insulating table is 75mm or less, one bolt or screw can be used for fixing. 4. Nordic minimalist lighting cannot be directly installed on combustible objects. Some families use painted three plywood to line the back of Nordic minimalist lighting for aesthetics. In fact, this is very dangerous and heat insulation measures must be taken; if the surface of the lamp is When high-temperature parts are close to combustibles, heat insulation or heat dissipation measures should also be taken. First: When installing, please make sure that the power is turned off, or that the wires reserved in the place where you need to install are not powered! Otherwise, life is safe!    Second: Connected to the northern European minimalist Saintly Lightingpower supply line The two wire ends should be in good electrical contact, and they should be wrapped with black tape and kept a certain distance. If possible, try not to put the two wire ends under the same piece of metal to avoid short circuit and danger. Third: If the screw cap is used in the Nordic minimalist lighting, the following two points should be paid attention to the wiring:   ①The phase wire should be connected to the terminal of the center contact, and the neutral wire should be connected to the screw terminal;   ② The insulating shell of the lamp holder should not be damaged or leaking to prevent electric shock when replacing the bulb.  Fourth: rooms with high floors or vibrating ceilings are suitable for installation of Nordic minimalist lighting. When installing Nordic minimalist lighting in a masonry structure, pre-embedded bolts should be used, or fixed with expansion bolts, nylon plugs or plastic plugs; wooden wedges should not be used. And the load-bearing capacity of the above-mentioned fixing parts should match the weight of the Nordic minimalist lighting. To ensure that the Nordic minimalist lighting fixtures are firmly fixed and reliable, and can extend their service life.   Fifth: When using expansion bolts to fix, the bolt specifications should be selected according to the technical requirements of the Nordic minimalist lighting size products, and the drilling diameter and embedding depth must conform to the bolt specifications. Sixth: When installing, pay special attention to the reliability of the connection between the lamp and the installation. The connection must be able to withstand 4 times the weight of the lamp without deformation.
If you are looking to get started with modern light fixtures, it's important to find a quified . Let Zhong Shan Saintly Lighting Co. Ltd be your provider. Visit us at Saintly Home Decor Lamps.
If you're interested in buying a of high quality and affordable price, let Zhong Shan Saintly Lighting Co. Ltd at Saintly Home Decor Lamps be your guide to the best shopping experience.
Overwhelming customers with too much information or the slew of benefits modern light fixtures provides–even if they're all valid–is a surefire way to lose their attention.
We attach a great importance to domestic market and knows the importance factors of manufacturing modern light fixtures, such as producing methods, etc.
Our company is professional in selling modern light fixtures as well as providing a series of relevant services.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...